General questions on KORTE mouldings
In what colour are KORTE mouldings available?
KORTE mouldings are available only in grey (light grey to concrete grey).
Can KORTE mouldings also be applied without coating?
KORTE Concave Mouldings and Drip Strips have a smooth, non-porous surface and are weather-proof, water-tight and vapour-tight and can therefore also be used without coating.
KORTE Spitters have a void content of approx. 25%, so they do need to be painted or coated.
In what lengths are KORTE products available?
Our profiles are available in multiples of 1 metre.
Are flexible versions of KORTE products also available?
Only the KORTE Drip Strip type T3 is also available in a flexible version as type T3 flexible.
Questions on delivery and ordering KORTE mouldings
What packing units exist?
- 10-metre packs, except Concave Moulding type H150/40 in 5-metre packs
Are there minimum order quantities?
The minimum order quantity is at least 10 metres, except Concave Moulding type H150/40 at least 5 metres
How long will delivery take?
- If you order and profiles are in stock, your order is handled and ready for shipping within 24h (Mon-Fri).
- For countries bordering Germany approx. 4-8 working days
How can I order KORTE profiles?
You can order our profiles by email to bauteile@korte.de.
How can I order KORTE profiles as a private individual?
Please contact your chosen plasterer, building company or local builder’s merchant! These companies can contact us at any time.
Questions about handling KORTE mouldings
How are KORTE Concave Mouldings glued?
We recommend gluing the mouldings to the floor to form a shear-resistant joint using 2- component epoxy resin adhesive and filling the joint with the wall with 1-component polyurethane adhesive, ensuring that a gap is formed in accordance with DIN 18540, where applicable.
How are KORTE Drip Strips glued?
We recommend gluing the mouldings with 1-component polyurethane adhesive. The layer of adhesive should be no more than 1 mm thick and cover the whole area to be glued. (Allow for a hardening time of 24 hours per mm.)
The mouldings must be glued with 2-component epoxy resin adhesive on fresh concrete and in areas exposed to salt spray.
Fore more information please clickhere.
How are KORTE Spitters glued?
The layer of adhesive should be no more than 1 mm thick and cover the whole area to be glued. (Allow for a hardening time of 24 hours per mm.)
The mouldings must be glued with 2-component epoxy resin adhesive on fresh concrete and in areas exposed to salt spray.
Fore more information please clickhere.
In what dimensions are KORTE Concave Mouldings available?
- H30/30
- H50/25
- H50/50
- H70/50
- H100/50
- H150/40
(The moulding types match the actual dimensions, i.e. H50/25 = 50 mm high x 25 mm wide)
Are there inside and outside corner elements?
No corner elements are available for KORTE mouldings. The mouldings can, for example, be sawn with an angle grinder or mitre saw with a hardened metal saw blade. Set a high speed and apply little pressure.